Round Rock Custom Cabinets
Custom Cabinets in Round Rock, TX
Custom kitchen cabinets, built-ins, and bathroom cabinetry in Round Rock, TX — handcrafted designs, quality materials. Free estimates.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Round Rock and nearby communities.
Get a free estimate
Tell us about the project and how to reach you.
Custom Cabinets
Cabinet Makers Near Round Rock TX
Tired of cabinet doors that don't sit flush? A filler strip where a drawer should be? Most of what gets sold as "custom" around here is really semi-custom, stock sized to the nearest standard width. Round Rock Custom Cabinets builds kitchens, closets, built-ins, and bathroom vanities measured to your actual walls, not a showroom template.
[Contact](/contact) us for a free estimate, or read on to see how a project works, what it costs, and what holds up out here. [About](/about) has more on how we work with homeowners across the area.
What we do
Custom Cabinets services
Custom Cabinets across Round Rock and the surrounding area.
Custom Kitchen Cabinets
Custom kitchen cabinets built to fit your walls. Hardwood doors, built-in boxes, free estimates.
Learn more →
Custom Kitchen Remodels
Cabinet-led kitchen remodels in Round Rock, TX, with design, demolition, cabinetry, and countertop coordination. Free estimates.
Learn more →
Built-In Shelving and Wall Units
Custom built-in shelving and wall units in Round Rock, TX, fitted to your actual wall space. Free estimates on design and install.
Learn more →
Custom Closet Systems
Custom closet systems in Round Rock, TX, built to your actual closet space with shelving, rods, and drawers. Free estimates.
Learn more →
Home Bar Cabinetry
Custom home bar cabinetry in Round Rock, TX, built for glassware, bottle, and serving storage. Free estimates on design and install.
Learn more →
Bathroom Vanity Cabinets
Bathroom vanity cabinets in Round Rock, TX. Moisture-resistant builds, free estimates.
Learn more →
Custom Pantry Cabinets
Custom pantry cabinets in Round Rock, TX, matched to existing kitchen cabinetry with adjustable shelving. Free estimates.
Learn more →
Entertainment Center Built-Ins
Custom entertainment center built-ins in Round Rock, TX, fitted to your wall with built-in cable management. Free estimates.
Learn more →
Looking for something else? Browse all services in the menu, or tell us about a custom project.
Why choose us
Why choose Round Rock Custom Cabinets
Measured on-site, not off a catalog
We measure your actual opening in Round Rock before anything goes on paper. Not a stock width pulled from a catalog.
Written estimates before cutting starts
You get linear footage, wood, and finish costs in writing before fabrication starts. No surprise change orders halfway through.
One shop, start to finish
The crew that measures your kitchen also builds and installs it. No handoffs between subs.
Built to match what's already there
Partial remodels get boxes that match your existing trim and stain, not a patch job that stands out.
Have a project in mind?
Get a Free EstimateHow it works
How our Custom Cabinets process works
Step 1Initial Consultation
We walk your space, talk through style and budget, and scope the project before any design work starts.
Step 2Design And Measurement
Precise on-site measurements turn into drawings you approve before cutting begins.
Step 3Material Selection
Pick your wood species, finish, and hardware from samples you can hold in your hand.
Step 4Fabrication
Boxes and doors come together in our shop with tight joinery, not pre-fab shortcuts.
Step 5Finishing
Stain, paint, or sealant gets applied by hand for a finish that holds up to daily use.
Step 6Installation
Installers level, secure, and align everything on-site, then walk you through the finished cabinets.
Ready to start?
Get a Free EstimateCost
Custom Kitchen Cabinets Cost in Round Rock TX
Price swings with scope, wood choice, and finish. A hand-stained hardwood door takes more shop time than a painted one. Here's what Round Rock homeowners typically see: These are ballpark ranges, not a quote. A free in-home measure gets you real numbers based on your space.
| Project type | Typical range | What’s included |
|---|---|---|
| Cabinet refacing | $3,000–$9,000, | new doors, drawer fronts, and box refinishing on existing cabinets. |
| Bathroom vanity | $1,500–$6,000, | single or double vanity sized to your bathroom. |
| Custom closet system | $2,000–$7,000, | shelving, hanging, and drawer storage. |
| Full custom kitchen | $15,000–$40,000+ | , complete cabinetry built to the room from scratch. |
| Built-ins and specialty cabinetry | $2,500–$12,000, | depending on size and complexity. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateMaterials
Materials and Methods We Use
Heat and humidity swings through Central Texas summers put real stress on cheap cabinet boxes. We build with materials that actually hold up.
Plywood Panels
A stable base for cabinet boxes that resists the swelling and delamination cheap particleboard suffers from.
Solid Hardwood
Moves with seasonal humidity instead of cracking, and the grain only looks better with age.
Laminate Surfaces
A budget-friendly finish with a wide range of colors and textures.
Wood Veneer
Thin wood layers that give a refined, consistent surface and resist warping in heat swings.
Soft-Close Hardware
Hinges and slides built for smooth, quiet, daily use in a busy household.
Custom Hardware Finishes
Handles and knobs chosen to match your design and resist tarnishing from humidity.
Questions on materials?
Get a Free EstimateTimeline
How Long Does a Custom Cabinet Project Take?
Most projects move through a few distinct stages. Here's how a typical one unfolds. Order further ahead for a full kitchen than for a reface. If your remodel has a hard deadline, tell us at the first visit so we can plan backward from it.
- 01
Consult
same day - 02
Design approval
1 week - 03
Fabrication
4–6 weeks - 04
Install
1–3 days
Need a schedule that fits?
Get a Free EstimateCodes & permits
Permits, Codes, and Compliance for Cabinet Work
Cabinet work alone usually stays simple on the paperwork side. Permits come into play once you start changing what's behind the walls. Always confirm with the city or county before work starts. Requirements can shift based on your specific project.
| Typically needs a permit | Often no permit |
|---|---|
| Moving a kitchen or bathroom wall | Replacing existing cabinets in the same footprint |
| Relocating electrical outlets or adding new circuits | Cabinet refacing and refinishing |
| Moving plumbing lines for a sink or wet bar | Closet systems and built-in shelving with no wall changes |
| Structural changes to support a built-in | Hardware and door swaps |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs Hiring a Custom Cabinet Pro
| DIY | Hire a pro |
|---|---|
| Swapping hardware (handles, knobs, hinges) | Full custom cabinet builds |
| Painting existing cabinet doors | Matching new cabinets to existing trim and stain |
| Adding shelf liners or simple organizers | Any job involving electrical or plumbing moves |
| Minor caulk and touch-up work | Fixing misaligned doors caused by foundation shift, since the fix is usually a rebuilt frame, not a hinge adjustment |
Not sure DIY vs pro?
Get a Free EstimateWhen to call
When to Call a Custom Cabinet Pro
A few signs mean it's time to stop patching and get an estimate: Contact us for a free estimate and we'll walk through what's going on.
- Doors or drawers that stick, gap, or won't close flush
- Visible separation between cabinets and the wall or ceiling
- Water staining or swelling in the cabinet boxes
- A kitchen layout that no longer works for how you cook or store things
- Dated finishes you've been meaning to deal with for years
Seeing warning signs?
Get a Free EstimateWhere we work
Serving Round Rock and nearby communities
Local pages for these communities. Nearby towns without a page are still in our service area.
Also serving
Brushy Creek · Hutto · Pflugerville · Georgetown · Cedar Park · Leander · Taylor · and others
Outside these locations?
Before & after
See the work up close
Before 
After
Customer feedback
What local customers say
Mark R.
3 weeks ago
5 out of 5 starsPrice was way more affordable than the other quotes we got for custom cabinets. Still felt premium — clean jobsite, solid finish, and I'd hire them again without thinking twice.
Round Rock, TX
Deborah A.
1 week ago
5 out of 5 starsCalled Round Rock Custom Cabinets after a neighbor tip in Round Rock. Super easy to deal with — clear answers, no runaround, and they actually cared about the details on our entertainment center cabinetry.
Teravista, TX
Margaret W.
3 days ago
5 out of 5 starsHonestly did not expect such a professional team. They showed up on time, explained every step, and the custom kitchen cabinets turned out better than I pictured.
Forest Creek, TX
Common questions
Custom Cabinets FAQs
How much does Custom Cabinets cost in Round Rock?
Most projects run anywhere from $2,500 for a small reface to $25,000+ for a full custom kitchen. Size, wood species, and finish are the big swing factors. A free measure gets you a real number, not a guess off the phone.
How long does Custom Cabinets take?
A reface job might be done in a week. A full custom kitchen usually runs 6 to 10 weeks from signed design to final install, most of that time spent in fabrication.
Do I need a permit for Custom Cabinets?
Straight swaps, like-for-like replacements, and refacing usually don't need one. Permits come into play when you're moving walls, electrical, or plumbing as part of the job.
Is DIY Custom Cabinets a good idea?
Hardware swaps and painting existing doors, sure, go for it. Full custom builds and anything involving layout changes are a different animal. That's where a shop earns its keep.
When should I call a Custom Cabinets pro?
Doors that won't close, visible gaps between cabinets and walls, or water damage in the boxes all mean it's past a weekend fix.
What affects Custom Cabinets pricing?
Linear footage, wood species, door style, finish, and hardware grade. A painted MDF door costs a lot less than a hand-stained hardwood one.
What is typically included in Custom Cabinets?
Design consult, measuring, fabrication, hardware, and install. Countertops and plumbing are usually coordinated separately unless you're doing a full remodel package.
How do I prepare my home for Custom Cabinets?
Clear out the cabinets you're replacing, box up breakables nearby, and keep a path clear for the crew. We'll walk you through anything specific to your job at the measure visit.
Ready for a clear estimate?
Tell us about the project, or call to talk through options in Round Rock.